Serving Terre Haute & the Wabash ValleyCall (812) 892-3270
Asphalt Paving in Rockville, IN

Parke County seat, at US 36 and US 41

Asphalt Paving in Rockville, IN

Historic homes, festival-season lots and country lanes in covered-bridge country.

  • No-cost site visits and written quotes
  • Every line item priced separately
  • Drainage and soil checked before paving

Paving in Covered Bridge Country

Asphalt paving in Rockville serves a historic county seat and the countryside around it. Rockville was platted in 1824, three years after Parke County was founded, and incorporated in 1854. It sits at the intersection of US 36 and US 41, at about 692 feet, and had 2,510 residents in 2020. The Rockville Historic District is on the National Register, and the town hosts the Parke County Covered Bridge Festival.

Historic homes

Many houses in and near the historic district are old, and their driveways tend to be narrow, sometimes shared, and often layered with past overlays. We remove old layers when the driveway has risen above the garage floor or the base has failed, rebuild the base and pave at the right height, using equipment sized for tight spaces.

Festival season

The Covered Bridge Festival brings heavy traffic to town each fall. Businesses, churches and property owners who rent parking need their lots in shape before then. We schedule patching, sealcoating and striping in late summer so everything has cured well before the crowds arrive.

Rural lanes

Parke County is full of long lanes to farms and country homes. We quote hot-mix asphalt and tar and chip side by side. HomeGuide puts tar and chip at $2 to $5 per square foot, about 30 to 40 percent less than asphalt, and notes that plow blades should be raised slightly over chip seal.

US highways

US 36 and US 41 both run through Rockville. New or changed driveway connections to either fall under INDOT's driveway permit process. In town, we check with the Town of Rockville before any work at the street or sidewalk.

Upland ground

Upland soils here stay wet in late winter and spring. We test the subgrade, build a firm base and slope surfaces so water leaves quickly.

A typical Rockville scope

For a historic-district driveway, the work often includes removing layers of old overlay, digging out soft soil near the garage, rebuilding the base and paving at the right height. For a business lot before festival season, it is usually crack sealing, patching failed areas, sealcoating and restriping.

Maintenance

Seal cracks each fall, sealcoat every few years and restripe lots after each seal.

Lanes in the hills

Parke County's rolling ground means some lanes climb or drop. Those need supported edges and a way to move water off before it runs the full length.

Timing

We pave late spring through early fall. For festival-season lots, late summer is the target so sealing and striping are fully cured before October.

Small towns nearby

From Rockville we also serve Rosedale, Montezuma and other Parke County communities, and we schedule nearby jobs together to keep mobilization costs reasonable.

Getting a quote

We visit, measure, test the base and send an itemized quote. Call (812) 892-3270 or

Get a Free Estimate

.

Rockville at a Glance

  • County seat. Rockville is the Parke County seat, platted in 1824 and incorporated in July 1854.
  • Festival town. Rockville hosts the Parke County Covered Bridge Festival, and the Rockville Historic District is on the National Register.
  • Crossroads. The town sits at the intersection of US 36 and US 41, at about 692 feet; it had 2,510 residents in 2020.
Tar and Chip Lanes in Terre Haute, IN

Rockville Questions

When should I seal my lot before the festival?

Late summer is ideal. Sealer needs 12 to 72 hours to cure and striping goes on after that, so leave a few weeks of margin before the crowds.

Can you work in the historic district?

Yes. We use smaller equipment, plan access carefully and match finished heights to garages and walks.

Do I need a permit for a driveway onto US 36 or US 41?

A new or changed connection generally goes through INDOT. Repaving behind the right-of-way usually does not.

Will chip seal hold up to plowing?

Yes, if the blade is raised about an inch, as HomeGuide advises.

Do you offer parking areas for festival visitors?

We can pave or chip-seal parking areas on private property, built with a base that handles occasional heavy use.

How long does sealcoat need before striping?

Sealer needs 12 to 72 hours to cure, per HomeGuide, and paint goes on once the surface is fully dry.

Asphalt or tar and chip for a hilly lane?

Asphalt handles turning and steep grades better. Tar and chip works on gentler runs and costs less. Many lanes use both.

Do you take small jobs in town?

Yes. We quote them individually and pair them with nearby work where we can.

How long does an in-town driveway take?

Usually one to two days after utility locates, then a few days before driving on it.

Free Estimates in Rockville, IN

Free quotes for Rockville homes, lots and lanes.

Call Now: (812) 892-3270